The Head Cover Adopts the Resistance Axis Buffering and Lowering Function, and Adopts Two Ultrasonic Atomizers, with Cold and Hot Function and Accurate Temperature Control. The Machine Shell Is Made of High Gloss 757abs Material, Helmet Transparent Abs and Imported Transparent Pc Inner Pot Material for Injection Molding.
ABS + PC + Iron + Copper. Function: Steaming, O3 Ozone, Nano-mist (Warm & Cool). Three Modes: Hair Dyeing, Hair Care, Oil Treatment. Capacity of Waste Water Bottle: 270ml. Temperature Grades: 6 GradesNatural Temperature, 45?Beauty Salon, Hair Salon, Household. After Each Use, Please Open the Drain Valve to Drain the Remaining Water in the Water Tank to Prolong the Service Life. After 5 Times of Use, Please Pour 50ml of White Vinegar and Soak It.
If the Room Temperature Is Lower than 12? Please Inject Purified Water Not Higher than 40? During Operation, Please Do Not Move or Shake the Instrument to Prevent the Water Level Sensor from Losing Control, Causing the Instrument to Automatically Stop Working and Display the "Ho" Fault Code Signal. In the Process of Use, If the Buzzer "Beeps" for a Long Time, the Time Screen Does Not Flash, the Display Code "Ho" and There Is No Water Mist Output, Indicating That the Water Level in the Water Tank Is Too Low, the Power Supply Should Be Disconnected, the Residual Water in the Water Tank Should Be Discharged, the Purified Water Should Be Injected Again, the Power Supply Should Be Restarted After 3 Minutes, and the Buzzer Stops, and Then It Can Work Normally. If Those Conditions Often Occur, Contact the Nearby Electrical Maintenance Department to Check Whether the Float Switch or Temperature Controller Is out of Control. Keep Hands and Feet Away from the Drain to Prevent Scalding. After the Work Is Completed Every Day, Please Remove the Residual Water in the Machine to Prevent the Accumulation of Water in the Machine from Giving off Unpleasant Smell and Scale Formation, so As to Avoid Causing Failure. When It Is Cold for Several Sections, the Residual Water in the Machine May Freeze.In Order to Prevent Icing from Damaging the Machine. Take out the Water Bottle, Pour out the Remaining Water and Rinse It.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, high reliability.Creative Design, Durable Material, Beautiful Appearance. Do not send to the Canary Islands.
Adjustable, Reusable, Wall Arm Mount. Abs + Pc + Iron + Copper.
Steaming, O3 Ozone, Nano-Mist (Warm & Cool). Hair Dyeing, Hair Care, Oil Treatment. Capacity Of Waste Water Bottle. This item is in the category "Health & Beauty\Salon & Spa Equipment\Salon Dryer & Steamer".
The seller is "pinjishangwu02" and is located in this country: US. This item can be shipped to United States.