It is strictly forbidden to add flavor liquids or use tap water, which will cause blockage inside the machine and seriously affect the service life of the machine. Turn on the power and turn on the power switch. The mist outlet of the nano-sprinkler must face the ground, not people and electrical equipment, so as to avoid unnecessary damage.
Depending on the water temperature, the waiting time for spraying the mist is different. Normal temperature water generally waits for 1-2 minutes. The indicator light is on and spraying starts. Note that the spray port should not be too close to human skin, so as to avoid the high temperature mist from harming people.
Be sure to clean the internal pipes of the machine every 30 hours of use to prevent the pipes from being blocked. Pour out the water in the water bottle and add white vinegar (white vinegar cannot be diluted). Then, like the normal working process, start the machine, white vinegar enters the machine and sprays out, which means that the pipe is being cleaned. Wash for at least 20 minutes.
After cleaning, you need to clean the white vinegar left in the water bottle of the machine, and pour the bottle of pure water, start the machine again, clean the white vinegar left in the machine, and spray a bottle of pure water. After each use, turn the machine to the maximum gear, unscrew the nozzle to spray a pot of water, spray the kettle in the pipe and then turn it off to avoid residual scale. Water bottles need to use soft water. Such as purified water, distilled water, etc. , hard water is not allowed, such as: tap water, well water, mountain spring water, etc.
No additives can be added to the water. After each operation, the water bottle must be filled with water.
If there is no water in the water bottle, the machine will emit a (ticking ticking) sound. This sound indicates that the internal motor is short of water. Please turn off immediately and fill the water bottle with water.
When the machine is started, the mist outlet must face the ground, spray out atomizing gas after preheating, and wait for no water droplets to spray out before use (about three minutes). When the machine starts up, a little liquid droplets are sprayed, which is normal. (The liquid droplets are the work formed by the steam cooling left in the pipeline after the previous use).Please do not repair the machine. Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Health & Beauty\Hair Care & Styling\Hair Color". The seller is "yybshop01" and is located in this country: US. This item can be shipped to United States.